The mhuxd interface is implemented via a local web server. On your browser go to: http://localhost:5052. The initial page will have "Home" and "Daemon" tabs. As you plug in microHam devices to the USB bus an additional tab will appear for each.

First go to the Daemon tab and add the appropriate ports for each of your devices. The name is more or less free-form, I start with com1. As I have a microKeyerII and StationMaster I do the following setup. You specifics will differ.

• Ports

• Radio
• Baud Rate: [set baud/bits as appropriate]
• Rig Type: [your rig here]
• Use Decoder if Connected: [x] << tracks changes made on radio
• Display
• Display Options
• Light: [22]
• Contrast: [10]
• Background Upper Line: [TX Frequency]
• Background Lower Line: [RX Frequency]
• All Parameters
• r1I2cCoupled: [1] << when coupling 2 devices via the iLink ports

• Radio
• [unused, gets data via iLink]
• Display
• Display Options
• Light: [21]
• Contrast: [8]
• Background Upper Line: [detailed antenna selection, type 2]
• Background Lower Line: [detailed antenna selection, type 1]
• All Parameters
• i2cCoupled: [1] << when coupling 2 devices via the iLink ports